Nissan Qashqai 2010 1.46 Adaptation <CONFIRMED>

You should hear the throttle motor move during those 10 seconds. 3. Idle Air Volume Learning (IAVL)

Do this twice to ensure the ECM registers the released position. 2. Throttle Valve Closed Position Learning Nissan Qashqai 2010 1.46 Adaptation

Wait 7 seconds. Fully depress pedal for ~20 seconds until the stops blinking and stays ON. You should hear the throttle motor move during

If you are performing maintenance on a 2010 Qashqai (J10), you must perform these "Learning" steps to ensure a stable idle and proper fuel management. 1. Accelerator Pedal Released Position Learning If you are performing maintenance on a 2010

This is the most critical "adaptation." It must be done when the engine is warm (70°C–100°C) and all electrical loads (A/C, lights) are OFF.

Confirm pedal is released. Turn ignition ON (wait 3 seconds). Fully depress and release pedal 5 times within 5 seconds.

5/6-speed Manual or CVT (Continuously Variable Transmission) Pure Drive variant reduced to 129g/km CO2 Common Issues