Often, after installing a universal board, the image appears upside down or mirrored. This specific firmware version pre-configures the "Mirror" setting so the image displays correctly on a Samsung-brand panel.
until the blinking stops or the TV turns on. Safety Warning Often, after installing a universal board, the image
Use a USB drive (8GB or smaller is usually best) and format it to FAT32 . after installing a universal board
Configures the driver board to match the specific pixel density and timing of a standard 18.5" or 19" HD panel. Often, after installing a universal board, the image
Reconnect power. The status LED will typically blink rapidly (red/green) indicating it is flashing.
Place only the .bin file in the main directory (root) of your USB drive. Flash the Board: Disconnect power from the board. Insert the USB drive.