: Ensure the camera is connected to a stable power source. Do not power off during the update. Installation Guide
The file is a firmware update package for generic Chinese IP cameras (often branded as XMeye or iCSee compatible) based on the Anyka T20 chipset. Firmware Identification Chipset: Anyka T20 (T20L/T20N) Version Date: August 31, 2018 (20180831) Platform: HDX P2P (Standard P2P cloud protocol) Device Type: IPC (IP Camera) Preparation Checklist
: Connect your PC to the same network as the camera and search for the device IP. Upload Firmware : Navigate to Device Config > System > Upgrade . Select the extracted .bin file from your computer. Click Start and wait for the progress bar to reach 100%. Default Credentials (Post-Update) T20.base.HDXP2P.gen.en.201808131.IPC.tgz
: You will need a MicroSD card (FAT32 formatted) or the CMS/VMS software on a PC.
: Open the .tgz archive and extract the internal firmware file (usually ending in .bin ). : Ensure the camera is connected to a stable power source
If the firmware resets your settings, the default login info for these boards is typically: : 192.168.1.10 or 192.168.1.18 Username : admin Password : (Leave blank)
: Only use this if your camera's current firmware version contains the string HDXP2P . Flashing the wrong firmware can permanently brick the device. Click Start and wait for the progress bar to reach 100%
: Use a tool like the General CMS or the DeviceConfig tool.