Every station should ideally have a single reference point for all grounds. Connecting to multiple disparate earth grounds (e.g., one for the AC service and another for the radio) creates ground loops , which can introduce hum and invite lightning surges into the shack.
In the amateur radio world, "grounding" and "bonding" are frequently used interchangeably, but they serve distinct purposes: Power, Grounding, Bonding, and Audio for Ham Ra...
All equipment with a three-wire power cord must use a true grounded outlet. "Cheater" adapters that bypass the third pin are hazardous and should never be used. Every station should ideally have a single reference
is the act of connecting all conductive parts together to ensure they stay at the same electrical potential. The goal is to minimize voltage differences between pieces of equipment, which prevents destructive arcs during lightning strikes and reduces RF noise. 2. Power Systems and AC Safety "Cheater" adapters that bypass the third pin are
Switch-mode power supplies (SMPS) can be a source of significant radio noise if not properly filtered. Experts recommend keeping the metal chassis of all AC-connected equipment bonded to the AC safety ground. 3. Managing RF and Interference (RFI)
Many hams mistakenly chase an "RF ground" to fix interference, but at radio frequencies, long wires have high impedance and do not act as effective grounds.