: For extremely difficult geometry, copy the surfaces, apply the draft to those surfaces, trim them, and then "Solidify" them back into the main part.
: If a specific area requires no taper, try entering a value of "0" for the draft in that section to maintain verticality while drafting surrounding faces. p1074464_wt.7z
Based on community discussions regarding similar drafted features, here is how you can effectively apply a draft: : For extremely difficult geometry, copy the surfaces,
: Often used for more complex geometry, this method allows you to use a specific edge or curve as the split point for the draft. This is highly recommended for parts with non-planar divisions. This is highly recommended for parts with non-planar
If the standard feature fails (which often happens on complex surfaces like fenders or casting pockets), consider these professional workarounds:
To draft a feature using the file (which likely contains a CAD model for a casting or molded part), you should apply a Draft feature to the relevant faces. This feature creates a taper that allows the part to be extracted from its mold easily.
: If a face is too complex, use a "Split Line" to break it into smaller segments before applying the draft to each part individually.