: For drip models like the KM209 , try holding the "CLEAN" button for 5 seconds after the cycle finishes to manually turn off the indicator.
: Place one KRUPS cleaning tablet into the designated maintenance slot (usually under the cup-warming plate).
To stop the flashing, you must perform the full cleaning procedure, which usually takes about 13–20 minutes: KRUPS CLEAN LED blinkt rot
: Once the first 10-minute phase ends, empty the drip tray again. The machine will then perform a 3-minute final rinse. Troubleshooting: Light Won't Turn Off
: If the light blinks rapidly during a cleaning process, it may mean the cycle was interrupted (e.g., by a power cut or running out of water) and needs to be restarted or resumed. : For drip models like the KM209 ,
: Press the "CLEAN" button. The machine will begin a multi-phase process including cleaning and rinsing.
: Empty the drip tray and the coffee grounds collector. The machine will then perform a 3-minute final rinse
: Unplug the machine for 30 seconds. On many models like the Krups Roma EA8108 , you can plug it back in while holding the power button for 5 seconds to clear the electronic memory.