Download File | Tp.ms3663s.pb801_1920x1080_moonx_...

The standby light should start flashing rapidly, indicating the update is in progress. until it finishes. Critical Warnings

: The 1920x1080 tag indicates this specific firmware is configured for Full HD (FHD) panels. Using firmware with the wrong resolution (e.g., 1366x768 on an FHD panel) can result in a distorted or blank screen.

: The "Moonx" part of the filename denotes that the firmware includes the specific splash screen (logo), remote control codes, and panel settings for Moonx brand televisions. Why You Might Need This File This firmware is typically used by technicians to: Download File TP.MS3663S.PB801_1920x1080_Moonx_...

: If the TV has sound and backlight but no picture, re-flashing the firmware can sometimes restore the LVDS signal.

: Use a drive smaller than 16GB, formatted to FAT32 . The standby light should start flashing rapidly, indicating

If the file is meant for USB recovery (usually named allupgrade_ms3663.bin ), follow these general steps:

: TP.MS3663S.PB801 is a "three-in-one" board, meaning it integrates the power supply, LED backlight driver, and TV signal processor into a single PCB. Using firmware with the wrong resolution (e

: If the TV won't respond to USB, you may need a CH341A programmer to write the .bin file directly to the 8-pin flash chip on the motherboard.