Download Dump Samsat Plus Mini Zip -

Rename your dump file to rom.bin or force_upgrade.bin (check your specific sub-model's manual). Turn off the receiver's power. Insert the USB drive.

is usually necessary for repairing a "blocked" receiver, fixing software bugs, or restoring the device to its original factory state. 1. Locate the Correct DUMP File

Turn the power on while repeatedly pressing the or Power button on the remote (or holding it down) until the "USB Upgrade" progress bar appears on the screen. ⚠️ Critical Warning Download DUMP Samsat Plus Mini zip

Select your .bin file and press to start. Do not turn off the power until it reboots. Option B: Forced Recovery (If the device is stuck/blocked)

There are two ways to apply the dump, depending on whether your receiver still turns on. Plug the USB drive into the receiver. Go to Menu > Tools (or Settings) > Upgrade by USB . Select All Code or Total Flash as the upgrade mode. Rename your dump file to rom

The receiver requires a specific format to read the file during boot or from the menu. Use a USB flash drive formatted to FAT32 .

Copy the .bin file directly to the root of the USB drive (not inside any folders). 3. Flash the DUMP onto the Receiver is usually necessary for repairing a "blocked" receiver,

Since firmware is specific to hardware versions, you must ensure the file matches your exact model (e.g., Samsat 1300 Plus Mini