: Overall height of 60", weighing roughly 200 lbs.

: Clean unpainted surfaces (like the table) with a cloth moistened with kerosene to remove protective coatings. Table Assembly :

: Tilts 45° out (away from belt) and 20° in (toward belt).

Maintain a minimum clearance of between the table and the sanding belt for safety.

: Use a 3-wire grounded extension cord. Ensure the gauge is heavy enough to prevent voltage drops and overheating (refer to the Delta Abrasive Belt Manual for specific gauge charts). 3. Operational Safety 6" Abrasive Belt Finishing Machine

Delta 52 611 Sander Manual -

: Overall height of 60", weighing roughly 200 lbs.

: Clean unpainted surfaces (like the table) with a cloth moistened with kerosene to remove protective coatings. Table Assembly : Delta 52 611 Sander Manual

: Tilts 45° out (away from belt) and 20° in (toward belt). : Overall height of 60", weighing roughly 200 lbs

Maintain a minimum clearance of between the table and the sanding belt for safety. : Overall height of 60"

: Use a 3-wire grounded extension cord. Ensure the gauge is heavy enough to prevent voltage drops and overheating (refer to the Delta Abrasive Belt Manual for specific gauge charts). 3. Operational Safety 6" Abrasive Belt Finishing Machine