Anime-av4 -

: If using an acrylic riser, stack the riser layers and secure them with four 20mm screws.

features a seven-layer acrylic design with tighter tolerances than previous models.

: Focus on evolving Cu , Ichigo , and Vegita early on. Evolved units like Hollowseph are essential for clearing story and challenge stages. Resource Grinding : anime-av4

: Install stabilizers, then foam, followed by leaf-spring gaskets on both sides of the plate before placing the plate onto the foam. Anime Vanguards (Alternative Match)

: Plug a USB cable into the PCB to test all sockets with tweezers before installing. Ensure the firmware is up to date via IV WORKS downloads. : If using an acrylic riser, stack the

: The top layer is 1 and counts down to 7 at the bottom. Preparation :

: Attach layer 7 to the bottom of layer 6 using four 8mm screws at the bottom front. Evolved units like Hollowseph are essential for clearing

: Use the included cotton gloves and microfiber cloth to keep the acrylic clean and free of fingerprints. Assembly Steps :